KEDSUM 60W 110V 7-in-1 Electric Soldering Iron Gun Kit with ON/OFF Control
UPGRADE DESIGN of KEDSUM new Version-Ⅲ soldering iron come with upgraded ON/OFF switch on handle body for more convenient, with temperature adjustment knob and LED indicator shows working status, cool down the tip quickly, better heat-resistant as well on material, other accessories also are pretty handy and perfect for both beginners or the experienced who need a portable solution to repair the household appliances, camera, phone, computer, lamps, toy, soldering drawing etc.
– Voltage/Power: 110V / 60W
– Soldering iron gun: 7.0-Inch (L)
– Power cord length: 59.0-inch (L)
– Temperature Range: from 200℃ to 450℃ (392℉ to 842℉ )
– Desoldering pump: 7.2 inch (L) x 0.7 inch(Dia.)
– Soldering Iron Tips Model: 900M Series (5 types: 1x 900M-T-I, 1x 900M-T-B, 1x 900M-T-K, 1x 900M-T-IS and 1x 900M-T-3.2D)
– Solder Tin Wire: 60% Sn, 38% Pb, 2.0% Flux; 0.039 inch (1.0 mm) [diameter], 0.35 ounce (10g)
– Tweezers type: T2-15, length 4.65-inch
How to solder:
▶1.Before use. Replace the tips to ensure tight enough; Prepare all solders and soldering iron; Suggest to start with low temperature at 300℃ for the first time.
▶2.Heat up. Plug in, coat with the wire on heated parts (not tips) till solder melts to test then select a fit temperature ASAP since the iron heats up fast; Clean with wet sponge for ready.
▶3.Soldering. Put the tip and solder wire close enough to the joint on PCB, tip needs to quick touch with the joint within 2s, then to be quick coated with the wire at the same time, when solder melt, need to remove tip and solder within 1s-2s in a direction of 45°, power off to be done.
(Please do not heat the PCB for long time and do not coat with the solder too much)
How to remove solder:
▶Press the desoldering pump until hearing the click sound, put the tip and pump close enough to the joint, when the solder melt and flow freely, click the pump quickly, remove ASAP. If necessary, repeat the steps.
▶1. Do not replace the tip when heating to avoid burning fingers.
▶2. Do not heat the iron when not use, should power off and cool it if necessary, otherwise will shorten its life.
▶3. Suggest if available to coat with your own rosin core solder before soldering would be perfect for your project.
1 * Soldering iron gun (with ON/OFF switch)
5 * Extra Soldering iron tips
1 * Desoldering Pump
1 * Solder wire
1 * Stand with cleaning sponge
1 * Anti-static Tweezers
1 * Tool carry case
1 * Manual